Please be aware this remote is only suitable for older 'X2' type receivers, not the newer 'X3' system.For the latest X3 remotes please head here
These stylish chrome-edged remote controls replace the black plastic key fobs previously supplied with the GLA-CU-X2 receiver unit (the older versions are still available separately). The body construction is of a higher quality to the earlier versions, while the three control buttons are larger and easier to use.
The remote uses a rolling-code encrypted transmission type as used by the GLA-CU-X2 model receiver. If you have an older GLA-CU-X, GLA-CU-20 or GLA-CU-12V receiver then please contact us for replacement remotes
Each transmitter may operate paired (programmed) receivers at up to 25M away (line of sight range, the range is reduced when operating through walls or objects). When planning locations for your transmitter and receiver bear in mind that metal (electrically conducting) objects in particular tend to block RF signals, so avoid these between the two devices.
More information is provided below.
Each remote is constructed from a waterproof metal and plastic body, 61x30x12mm in size. It features three buttons, two for forwards and backwards travel of an actuator (or for clockwise and counter-clockwise rotation of a DC motor) denoted by arrows, and one button for stopping marked with a square.
A blue LED at the top of the device indicates when a button is pressed, and can also help to indicate when the battery is running low (if the light starts to dim). Be aware that a bit of a flicker (high frequency pulsing) from the LED when a button is pressed is normal.
The remote transmits at 433MHz and takes two CR2016 3V batteries for power (two are included inside each remote, ready for use).