Please be aware this remote is only suitable for older 'X2' type receivers, not the newer 'X3' system.For the newer X3 remotes please follow this link
This extended-range hand-held remote transmitter may be used as a replacement or supplement to the small key-fob remotes included with our receiver units. The controller is intended for use with the GLA-CU-X2 receiver which has a rolling-code encrypted transmission type. If you have an older GLA-CU-X, GLA-CU-20 or GLA-CU-12V receiver then please contact us for fixed-code versions of the transmitter.
The higher-power transmitter circuit of this device allows for operation at up to 200M away (line of sight range, the range is reduced when operating through walls or objects). When planning locations for your transmitter and receiver bear in mind that metal (electrically conducting) objects or surfaces in particular tend to block RF signals, so avoid having these between the two devices.
Each hand-held remote is supplied with a transparent wall-holder, as pictured.
More information is provided below.
The remote is constructed from a tough plastic body 120x44x15mm in size. It features three buttons, two for forwards and backwards travel of an actuator (or for clockwise and counter-clockwise rotation of a DC motor) denoted by engraved arrows, and one square button in-between them for stopping. A red LED at the top of the remote provides indication of when a button is pressed.
The remote transmits at 433MHz and takes a single A23 12V battery for power (one is included inside each remote, ready for use).