Slimline Stainless Steel Push Button Anti-Vandal Wired Switch 22mm

This is a compact bodied, short-travel, normally-open push-button switch, with anti-vandal stainless steel (304) body and stainless steel nut. It is designed for mounting in a 22mm diameter hole in panels between 1-3mm in thickness. 

Each button is supplied with SM-2R latching 2 pole wired connectors (110mm to connector) ready-soldered to their rear (JST-SM compatible), with the corresponding SM-2P wired connector also included, as pictured. They are designed for switching low current low voltage signals only, with a maximum electrical load rating of 50mA at 24V DC.

Regular price £9.50
Regular price Sale price £9.50
(each, exc VAT)

Availability: IN STOCK

SKU: L22U-JSTSM

Download Reference Sheet
Langir Ultra-Short LXXU
PDF Download Image

These buttons may be used for switching low power control circuits, such as providing commands for the GR-MOT1 motor controller. They provide a satisfying 'click' sensation in response to a button press, allowing you to feel when the button is activated even though the movement itself is very small (as little as 0.5mm, with only ~4N of force required). 

We have added wired connectors to the buttons to simplify the connection process, and to allow for the easy replacement of any damaged switches. The connectors (JST-SM compatible) have a latching action to help prevent accidental disconnections.



Technical Information
Version
Non-illuminated (No LED). Flat top
Electrical rating
50mA, 24V DC (up-to, maximum values) NOT suitable for mains currents
Electrical life
50,000 cycles
Contact resistance
50mΩ Maximum
Operating temperature
-25°C to 55°C
Travel
0.5mm
Moisture protection
IP67. This rating is for the button-side when used with the included O-ring seal, with button mounted on a smooth-surface impermeable panel to ensure a seal between button front flange and the panel. The rating does not include the rear of the button or the connector/lead, which are assumed to be protected by the enclosure into which it is mounted
Panel thickness
1-3mm
Connector
SM-2P and SM-2R corresponding latching-action connectors, PA66 housings. JST-SM compatible
Wire specification
UL1007 22AWG 80°C PVC-insulated, with bare tinned wire ends on the opposite connector side
Device standards
RoHS 2015/863  

If you are unsure about the suitability of this device for your application, or if you have any questions about bulk ordering or customisations, please contact us