AC to 24V DC 4A Power Supply/Adapter for Motors & Actuators YHY
This 24V DC power supply is manufacturered specifically for Gimson Robotics, with output settings optimised for running electric motor and actuator loads. Each is capable of supplying up to 4A continuously, up to 5A at a maximum 50% duty, or up to 7A for <1s bursts.
The adapter is configured to handle the short spikes in current demanded of small to medium sized inductive loads (DC motors), which many other power supplies designed for resistive loads (LED drivers) cannot, whilst maintaining automatic overload (and short) protection.
Each adapter has a rectangular body, with a 0.5m output lead running from the adapter block to a right-angle Male DC barrel connector (2.1 x 5.5mm). An IEC C14 connector in the side of the adapter matches up with the included C13 mains cable, with a 3-pin UK fused plug (3A fuse).
The power supply can accept an input of between 100V~240V AC, 50/60 HZ.
Availability: IN STOCK
SKU: YHY-2404000_UK
YHY-2404000
Unlike many similarly-sized power supplies this power supply is capable of powering medium sized electric motors (inductive loads) without cutting out when the motor starts-up. Additionally, this power supply offers far better efficiency than many others (Class VI standard), with a very low idle/standby power consumption.
This power supply is ideal for powering our GLA3000-N model of actuator (single actuators), or our GR-WM4-ENC motor (up to its rated load), as well as other similarly sized 24V DC loads. If you need more power, please take a look at our 24V 12A model.
This power supply is suitable for indoor use only. Every power supply is tested under load before sending. If you have any questions about this item, or suitability for your application, please contact us.
Specifications
UK 3-pin 3A-fused C13 Lead (between 1.1m to 1.8m long depending on availability)
OR
EU 2-pin-and-Earth Schuko C13 Lead (between 1.1m or 1.8m long depending on availability)